FAQs

Find answers to the most common questions about our products

Including Woodhouse WeatherproofĀ® and EdgelineĀ®, general maintenance, environmental considerations, and more. Whether you’re a professional builder or a DIY enthusiast, we’ve got you covered with helpful information to make your experience with Woodhouse products as seamless as possible.

Construction

Woodhouse Weatherproof is H3 treated and purpose built for external construction. Pre-primed and ready for installation, Weatherproof stands the test of time in Australia’s harsh climate.

Our full range of installation guides can be found here: https://www.woodhouse.com.au/installation-guides/

Ensure that all Weatherproof products are kept dry and away from moisture before installation to minimise the potential of degradation on-site. It is advisable to wear appropriate protective equipment when handling, cutting and working with all Weatherproof. Gloves, dust masks and goggles are recommended to protect against dust and airborne particles. Fill any nail holes and defects with a wood filler, sand and spot prime to restore the coating. Coat any exposed timber with an in-can preservative resealer (such as Protim XJ or Tanalised Enseal) and re-coat it with a quality primer (acrylic or oil-based) before final finishing. The important points to remember are to reseal the protective barrier created by the LOSP and re-apply a primer to repair the coating.

Use hot-dipped galvanised fixings to install all Weatherproof products. Check the manufacturer’s recommendations and ensure that any fixing selected is non-corrosive.

Dispose of all offcuts and waste as you would normal building waste. Do not burn/incinerate any shavings, sawdust or offcuts in open fires or barbeques. Do not use shavings in gardens or landscaping.

Edgeline

Woodhouse Edgeline has been manufactured for use as a premium internal fix-out solution. It is not recommended for external use.

Environmental

ā€˜VOC’ stands for Volatile organic compounds. These are gases emitted from certain solids or liquids. Some may have short—and long-term adverse health effects. Due to the designs of modern homes, the amount of natural ventilation has decreased, which has raised the importance of ensuring products are VOC-free. The paint and glue used in the Woodhouse Edgeline range (indoor mouldings) are water-based and VOC-free.

FSCĀ® is the ā€˜Forest Stewardship Council®’, a global, not-for-profit organisation dedicated to promoting responsible forest management worldwide. FSCĀ® defines standards based on agreed principles for responsible forest stewardship that are supported by environmental, social and economic stakeholders. For more information, visit www.fsc.org

Maintenance

The Weatherproof range is a long-term building product that has a limited manufacturer’s warranty on product durability and coating. All Weatherproof needs to be applied with two coats of quality finish paint and installed with recommended fixings. To ensure performance over time, re-coat the installed product following the paint manufacturer’s advice. Providing all Weatherproof is maintained, it will give the end user years of service in the desired application. Details on the product warranties can be found in the Product Literature Section.

Painting

Definitely not! The Woodhouse Weatherproof Pink Primer has been developed by Dulux Industrial Coatings, a business unit of Dulux Group that provides high-quality, factory-applied industrial coatings products to the Australian and New Zealand markets and is committed to supporting the use and performance of these coating materials. The pink primer is a premium-grade, industrial oil-based coating that has been factory-applied to ensure its fit for purpose and readiness for installation and final top coating. Being a genuine primer, all products can be finished with two applications: premium acrylic or enamel topcoat paints.

Yes. Once all Woodhouse WeatherproofĀ® is installed, make sure that the Pink Primer is intact and has not suffered any degradation or damage while on site or during installation. If some areas need attention, use a quality timber wood filler, lightly sand them, and apply a quality primer (acrylic or oil-based) to touch them up. Follow this up with two topcoats of quality paint to complete the job. Maintain your project according to the manufacturer’s guidelines and instructions.

When choosing topcoats, we suggest selecting lighter colours with a Light Reflective Value (LRV) of 45 to 100 (Pure white = 100). Dark colours with an LRV of 44 or less will generate high surface temperatures, increasing the risk of resin bleed, cracking, and distortion, as well as the long-term performance of the top coating system. See our painting guide here for more information: https://www.woodhouse.com.au/painting/

Treatments

LOSP stands for Light Organic Solvent Preservative, referring to chemicals employed in treating all Weatherproof products. H3 indicates the hazard level corresponding to the treatment quantity and the suggested worst-case application. Although this H3 treatment level is relevant for above-ground, weather-exposed applications, Woodhouse Weatherproof is applicable in these scenarios internally.

Kiln drying guarantees that Weatherproof maintains dimensional stability and remains undistorted during onsite use. In straightforward terms, the timber preserves its original size, shape, and strength grading. All radiata are dried to an average moisture content of 12-15%, providing versatility for weatherproofing in various construction applications. Finger jointing involves eliminating defects from the wood fibre and mechanically connecting pieces of radiata to create longer straighter lengths.

Weatherproof

All Woodhouse WeatherproofĀ® is made from premium plantation Radiata pine that has been specifically selected for the intended end-use application. Sourced from legally managed and sustainable forests, all wood fibre used in the manufacturing process is environmentally considerate.

Woodhouse WeatherproofĀ® is the name given to the range of Pink Primed LOSP Treated Radiata Architectural Pine designed for external construction. H3 LOSP (Light Organic Solvent Preservative) chemically treated with an organo-biocide, all Weatherproof products are recommended for building projects outside the home, such as pergolas, decks and handrails, garages and carports. The Weatherproof range is primed with a premium industrial coating and is ready for installation and final finishing.

Weatherproof Timber is a highly competitive option for all structures where a termite-resistant, pre-primed product is deemed necessary. With the F7 and GL8 Structural range, the end user has a credible option for building decks, pergolas, walkway portals, and gazebos.

Yes, to provide you with some inspiration, our gallery has a range of outdoor furniture and DIY projects that have been built with Woodhouse Weatherproof Timber.

Time-proven timber products, available around the country fast, flexibly & frequently.

When you need fit-for-purpose timber products manufactured to go the distance, you need Woodhouse.